
SAFE comes on or goes out in the display.
Function Lock
You can activate the function only when the
appliance operates. The Function Lock pre-
vents an accidental change of the oven
function.
Activating / deactivating the Function
Lock function:
1.
Activate the appliance.
2.
Activate an oven function or setting.
3.
Touch and hold
and at the same
time for 2 seconds. An acoustic signal
sounds.
Loc comes on or goes out in the display.
You can deactivate the appliance when the
Function Lock is on. When you deactivate
the appliance, the Function Lock deacti-
vates.
Settings menu
The settings menu lets you add or remove
functions from the main menu (for example:
you can activate or deactivate the Residual
heat indicator). The settings menu has a
maximum of seven settings (from SET1 to
SET7). Refer to the table below to see the
possible value of each setting.
Settings menu
Indicator of the setting
menu
Description Value to set
SET1 SET+GO ON / OFF
SET2 RESIDUAL HEAT INDICATOR ON / OFF
SET3
1)
KEY TONE CLICK / BEEP / OFF
SET4 FAULTY TONE ON / OFF
SET5 SERVICE MENU ---
SET6 RESTORE SETTINGS YES / NO
SET7
2)
TIME EXTENSION ON / OFF
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
2) Selected models only
You can set the settings menu only
when the appliance is deactivated.
Activating the settings menu:
1.
If necessary, deactivate the appliance
with
.
2.
Touch and hold
for three seconds.
The display shows "SET1" and "1"
flashes.
3.
Touch
/ to select the setting.
4.
Touch
.
5.
Touch
/ to change the value of
the setting.
6.
Touch
.
Automatic switch-off
For safety reasons the appliance deacti-
vates automatically after some time:
• if an oven function operates.
• if you do not change the oven tempera-
ture.
Temperature Switch-off time
30 °C - 115 °C 12.5 h
120 °C - 195 °C 8.5 h
200 °C - 245 °C 5.5 h
250 °C - maximum °C 3.0 h
After the Automatic switch-off, touch a sen-
sor field to operate the appliance again.
Important! The Automatic switch-off works
with all oven functions, apart from Slow
Cook, Duration, End, Time delay.
progress 13
Commenti su questo manuale