Progress PAS3000E Manuale Utente Scaricare il pdf (Pagina 24)

deactivates. Remove the object or

clean the control panel.

• you do not deactivate a cooking zone

or change the heat setting. After some

time comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti‐

vates after

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

The heat setting

Touch to increase the heat setting.

Touch to decrease the heat setting.

Touch and at the same time to

deactivate the cooking zone.

Activating and deactivating the

outer rings

You can adjust the surface you cook to

the dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the

sensor field. The indicator comes on.

To deactivate the outer ring: touch the

sensor field until the indicator goes out.

Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch again

and again until the indicator of a

necessary cooking zone comes on.

To activate the function or change the

time: touch or of the timer to set the

time (00 - 99 minutes). When the indicator

of the cooking zone starts to flash slowly

the time counts down.

To see the remaining time: set the

cooking zone with

. The indicator of the

cooking zone starts to flash quickly. The

display shows the remaining time.

To deactivate the function: set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

When the time comes to an

end, the sound operates and

00 flashes. The cooking zone

deactivates.

To stop the sound: touch .

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and the

cooking zones do not operate. The heat

setting display shows

.

To activate the function: touch

.

Touch or of the timer to set the time.

When the time comes to an end, the

sound operates and 00 flashes.

To stop the sound: touch .

The function has no effect on

the operation of the cooking

zones.

STOP+GO

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, you cannot

change the heat setting.

The function does not stop the timer

functions.

24 Progress

1 2 ... 19 20 21 22 23 24 25 26 27 28

Commenti su questo manuale

Nessun commento